Witch's Writing Set, Part Two

This part of the recipe is all about decoration; for the first half of the Writing Set, see my earlier post.

You will need:

Ribbon (in a colour of your choice), I chose green

Decorations (that go with your colour choice), I chose keys and a chinese coin

Glue gun

Damp cloth

1. The letter holder thing that I started with had a slightly wider base than its walls, so I decided to add my trim just above that to accentuate the shape. I measured a length of green ribbon against the perimeter of the box, and glued it in place with the hot melt.

2. Next I had a rummage around my local bead shop for some large beads that would work as accents. I found two sort of Steam-punky keys (which are a symbol of knowledge, and therefore appropriate for a writing set) and a silver Chinese coin with dragons on (for good luck). First, I measured the middle point on the front of the letter holder, marking it with a bit of tailor's chalk, then glued the coin to the front (making sure that it was the right way up). It looked a bit strange on there on its own, so I added a sort of tassel of ribbons to the centre of it.

3. I lined up the keys on the sides of the box, slanting slightly, to cover the edge of the seam, and glued those in place.

4. Using a damp cloth I cleared away any excess glue from around the box and finished smoothing out any remaining wrinkles in the fabric.

Voila! The finished writing set. I thought it turned out rather well, and from her reaction I'd say Bones appreciated the effort :)

Witch's Writing Set, Part One

Me and Bonesy are big Harry Potter fans - like you couldn't tell - so for her birthday I decided to make something faintly Hogwarts related. I looked at owls, and although they were reasonably priced, the implications of raising an owl in an urban community were complicated, so I settled for a writing set instead :)

Here's part one of the how to:

I managed to track down a letter holder type object, so I didn't have to make that, but there are pretty good cardboard makes out there if you need them. When we moved I managed to sort through my fabric collection and came across the perfect covering material: black, not too fine, fairly practical.

What you'll need for the box:

Letter holding thingy

Covering fabric of your choice

Ribbon of your choice

Cardboard tube

Small cardboard boxes (these and the tube can easily be made from cardboard - I just happened to have them)

Scissors

Glue gun / PVA

Decorations

Now, when I started this project I'd lost my glue gun, but if you have one I'd recommend using it from the start.

I also put together a few bits that I couldn't make (from here, an excellent website):

Ink

An emerald turkey quill

Parchment

1. Since the box thingy was covered with a shiny laminate type affair I gave it a light sanding so the glue would take more easily, then I put on the glue - you have to wait a few minutes for it to get properly tacky.

2. It was quite tricky to get the covering material folded over properly - in the end I put in a couple of tiny stitches to hold it in place, and used electrical tape to hold it in place until the glue dried.

3. Once the glue had dried, which took a while, I cut a section of the cardboard tubing to hold the quill. Once I covered it I slotted it into place inside the box thingy, and smoothed out the wrinkles in the covering material with a sliver of cardboard. Since the small box for the ink is unlikely to be seen, it didn'tneed a covering; the shot below is of the inside of the box thingy, with one half of the covering material smoothed out.

Well, that's all for this week. Next week: decoration :D